Public Notices 05-11-23

IN THE CHANCERY COURT OF WAYNE COUNTY, MISSISSIPPI

IN THE MATTER OF THE ESTATE OF WILLIE RAY DAVIS, DECEASED

AMY HOLMES, ADMINISTRATRIX c.t.a.

NO. 2023-77

NOTICE TO CREDITORS OF THE ESTATE OF WILLIE RAY DAVIS

Letters of Administration c.t.a. having been granted on the 19th day of

April, 2023, by the Chancery Court of Wayne County, Mississippi, to the

undersigned, AMY HOLMES, Administratrix c.t.a. of the Estate of Willie

Ray Davis, deceased, notice is hereby given to all persons having claims

against said Estate to present the same to the Clerk of this Court for

probate

and registration according to law, within ninety (90) days from the

first publication of this notice, or they will be forever barred.

THIS the 19th day of April , 2023.

/s/ AMY HOLMES

AMY HOLMES,

Administratrix c.t.a.

Publish: April 27, May 04 & 11, 2023

ABANDONED VEHICLE

2006 Ford Crown Vic, VIN No. 2FAFP71W16X150538 to be sold June 12, 2023

at 9:00 a.m., Stacey's Wrecker Service LLC, 919 Wayne St., Waynesboro,

MS 39367. Telephone no. 601-735-2008.

Publish: April 27, May 4 & May 11, 2023

ABANDONED VEHICLE

2009 Honda Accord, VIN No. 1HGCP36879A013781, to be sold June 5, 2023 at

9:00 a.m., Stacey's Wrecker Service LLC, 919 Wayne St., Waynesboro, MS

39367. Telephone no. 601-735-2008.

Publish: April 27, May 4 & May 11, 2023

IN THE CHANCERY COURT OF WAYNE COUNTY, MISSISSIPPII

N THE MATTER OF THE ESTATE OF J.C. HOPKINS, DECEASED

JAMIE HOPKINS, EXECUTOR

CAUSE NO. 2023-79

NOTICE TO CREDITORS OF THE ESTATE OF J.C. HOPKINS

Letters Testamentary having been granted on the 21st day of April, 2023,

by the Chancery Clerk of Wayne County, Mississippi, to the undersigned,

JAMIE HOPKINS, Executor of the Estate of J.C. HOPKINS, deceased, notice

is hereby given to all persons having claims against said Estate to

present the same to the Clerk of this Court for probate and registration

according to law, within ninety (90) days of from the first publication

of this notice, or they will be forever barred.THIS the 21st day of

April, 2023

/s/ Jamie Hopkins

Jamie Hopkins,

Executor

Publish: April 27, May 4 & May 11, 2023

PUBLIC NOTICE

INVITATION TO BID FOR HUNTING AND FISHING RIGHTS

BID NUMBER

10449

Notice is hereby given by the Wayne County Board of Education that

sealed bids will be received by said Board until 10:00 A.M. on Tuesday,

May 30, 2023 in the Office of the Superintendent of Education, 810

Chickasawhay Street, Waynesboro, MS 39367 for a lease of hunting and

fishing rights on the following described Sixteenth Section Public

School Trust Lands, Wayne County, Mississippi:

Section 16, Township 6 North, Range 8 West

Containing 154 acres, more or less

Section 16, Township 6 North, Range 8 West

Containing 484 acres, more or less

Section 16, Township 7 North, Range 7 West

Containing 259.74 acres, more or less

Section 16, Township 7 North, Range 9 West

Containing 640 acres, more or less

Section 16, Township 8 North, Range 6 West

Containing 480 acres, more or less

Section 16, Township 9 North, Range 7 West

Containing 191 acres, more or less

Section 16, Township 9 North, Range 8 West

Containing 610 acres, more or less

Section 16, Township 10 North, Range 5 West

Containing 606 acres, more or less

Section 16, Township 10 North, Range 7 West

Containing 350 acres, more or less

In accordance with Section 29-3-41 of the MS Code, all bids will be

opened at the regular meeting of the Board of Education of the Wayne

County School District at 3:00 P.M., Tuesday, May 30, 2023, in the board

room of the Superintendent's Office located at 810 Chickasawhay

Street, Waynesboro, Mississippi 39367.

The Wayne County Board of Education requires a minimum bid of $6.25 per

acre with the lease contract ending June 30, 2026. All bidders must

enclose a bid deposit (cashier's check, money order, or personal

check) in the amount of the annual rent with the bid when submitted. It

is understood the checks and/or money orders will be returned to the

bidders whose bids are not accepted.

The Lessee is required to pay the annual taxes on the property to the

Wayne County Tax Collector. The Lessee is also required to pay a

one-time filing fee to the Wayne County Chancery Clerk upon execution of

lease.

The Wayne County Board of Education reserves the right to reject any and

all bids, but if any bid is accepted, the Board will award said lease to

the highest and best bidder.

Additional information can be obtained by contacting the

Superintendent's Office at 601-735-4871.

WAYNE COUNTY SCHOOL DISTRICT

Tommy Branch

Superintendent of Education

Publish: May 4 & 11, 2023

Wayne County School District does not discriminate on the basis of race,

color, religion, national origin, sex, age, or disability in providing

educational programs and services or employment opportunities and

benefits. The following person has been designated to handle inquiries

and complaints regarding the non-discrimination policies of the school

district: Mrs. Lynn Revette, Assistant Superintendent of Education, 810

Chickasawhay Street, Waynesboro, MS 39367 (601) 735-4871Phone:

800-368-1019 Toll Free: 800-537-7697 Email: OCRMail@hhs.gov

ADVERTISEMENT FOR BIDS

Notice is hereby given that the BOARD OF SUPERVISORS OF WAYNE COUNTY, MS

will receive bids for the purchase of the following:

LEASE PURCHASE OF ONE 299 D3 OR EQUIVALENT COMPACT TRACK LOADER

Competitive sealed bids will be received up to Monday, June 5th, 2023 at

10:00 a.m. in the Board of Supervisors Office. The physically address to

the Board of Supervisors office is 609 Azalea Drive, Waynesboro, MS,

39367.

Specifications

BASIC SPECIFICATIONS

Net power using SAE 1349 shall be at least 106 hp (79 kW).

Gross power using SAE J1995 shall be at least 110 hp (82 kW).

Operating weight shall be 11756 lb (5333 kg).

Machine shall have a maximum length of 154.7 in (3931 mm) with bucket on

ground and 125.5 in (3189 mm) without bucket on ground.

Machine width shall be 78.0 in (1981 mm) when equipped with 17.7 in (450

mm) wide tracks.

Machine height at the top of the cab shall be 83.6 in (2125 mm).

ENGINE

Engine shall be a 3.8L, Turbo Diesel Engine, meeting Tier4 Final (Stage

IV) Emissions Standards

The engine emissions solution shall incorporate the latest Tier 4 Final

emissions technology which captures particulate matter by utilizing a

wall flow filter design.

Engine shall be direct fuel injected, turbocharged, liquid cooled and

shall have four cylinders.

Battery Disconnect switch (master switch) must be available which will

provide a basic level of machine security and prevent battery drain

during periods of inactivity.

The machine shall be equipped with a water-in-fuel sensor and in cab

indicator.

POWERTRAIN/TRANSMISSION

Two hydrostatic axial piston drive pumps shall be splined directly to

the engine via a flexible coupling for maximum efficiency, reliability

and serviceability and shall power the final drive motors, driving the

tracks.

Hydrostatic drive pumps shall be contained in a mono-block housing for

maximum reliability and durability.

The drive system shall be of an external positive drive with

steel-on-steel contact of tooth and sprocket engagement.

Electronic foot throttle shall be provided to allow the operator to

match engine speed to a task. The foot throttle shall allow the operator

to vary engine speed and minimize fuel consumption. The machine will

have the capability to electronically smooth foot throttle control while

operating over rough ground.

An electronic torque management feature shall allow maximum power to the

tracks while minimizing engine stalling.

Maximum forward and reverse travel speed 1 shall be at least 5.2 mph

(8.4 kph).

Maximum forward and reverse travel speed 2 shall be at least 8.4 mph

(13.5 kph).

Must have planetary gear reduction final drive.

2 Speed must be standard.

STEERING

The machine shall be equipped with a single, electrically operated

joystick that controls the forward/reverse and steering directions.

Machine must be equipped with a selectable pattern control changer to

operate in either "ISO" Pattern or "H" Pattern.

Machine shall have an air ride seat with seat mounted / adjustable

joystick controls.

Full turning radius from center/coupler without a bucket shall be no

greater than 58.1 in (1476 mm).

BRAKES

Machine shall have a spring applied, hydraulically released parking

brake that shall automatically engage when arm bar is raised, and shall

be designed to hold machine static at any point on a 2 to 1 slope.

HYDRAULIC SYSTEMS

The machine shall be equipped with a single, electrically operated

joystick that controls the lift, lower and tilt functions.

The hydraulic pumps shall be driven directly off the engine for maximum

hydraulic performance and reliability-no belts shall be used.

Machine shall be equipped with auxiliary hydraulics activated by a thumb

switch located on the right joystick.

The machine shall be equipped with a hydraulic tank that has an

anti-cavitation feature.

The machine shall be equipped with a hydraulically driven fan,

eliminating maintenance costs and friction losses associated with a

belt.

The High Flow hydraulics of the machine shall be at least 40 gal/min

(150 L/min).

The High Flow hydraulic pressure of the machine shall be at least 4,061

psi (28,000 kPa).

The High Flow hydraulic horsepower of the machine shall be at least 94

hp (70 kW).

The High Flow hydraulic pump flow shall be supplied by a load sensing

piston pump.

AXLES

Machine shall have 4 heavy-duty torsion axles to suspend each side of

the undercarriage from the machine frame and shall be shock absorbing.

UNDERCARRIAGE

The track shall consist of molded rubber with embedded steel bars that

span the width of the track.

The track shall consist of continuous wound steel cables that provide

tensile strength so that the track does not stretch.

The undercarriage shall not be directly mounted to the machine frame,

but shall instead be suspended via four independent torsion axles in

order to minimize machine stresses and maximize traction.

The undercarriage shall contain front and rear triple flange steel

idlers.

Machine shall have a minimum ground clearance of no less than 9.6 in

(245 mm).

Machine ground pressure shall not exceed 4.8 psi (33.0 kPa) with 450mm

wide tracks.

Overall length of track shall be 89.4 in (2270 mm).

Length of track on the ground shall be 69.6 in (1767 mm).

Machine weight shall be evenly distributed across the entire width and

length of the track via multiple sets of rollers to disperse pressure,

and maximize traction and flotation.

Undercarriage shall consist of an open design that allows easy cleaning

of components.

Elevated positive track shall keep drive components away from ground

debris.

OPERATOR STATION

The machine shall be equipped with deep skid-resistant, self-cleaning

steps.

The machine shall have no foot controls used to operate loader arm, tilt

function or auxiliary hydraulics.

The machine shall be equipped with an High Back, Heated, "Air Ride"

Suspension Seat with lumbar and recline adjustments.

The machine shall have a one-piece sealed & pressurized cab design.

The machine shall be equipped with both a hand and a foot throttle.

The machine shall be equipped with adjustable boom / bucket response

control, adjustable drive response control as well as travel speed

control (creeper).

The machine shall be equipped with a single, electrically operated

joystick that controls the lift, lower and tilt functions.

The machine shall have a retractable high visibility seat belt.

The machine shall come standard with an arm bar that when lifted,

automatically engages the machine parking brake for added operator

comfort and safety.

The machine shall be equipped with ROPS/FOPS protective structures rated

to at least (14,771 lb.) 6700 kg.

Cab door must be equipped with a 2 quick release handles to remove front

door that require no use of tools to remove.

The machine shall have a heater coil rated capacity of at least 23,518

Btu (5930 kcal).

The machine shall have audible warning alarms for engine coolant

temperature, engine oil pressure and hydraulic oil temperature.

Machines shall be equipped with a hydraulic lockout mechanism that

prevents loader arm movement with door in open position.

Machine shall be equipped with a convex, rearview mirror for superior

visibility to the rear and sides of the machine.

Machine shall have removable side windows that require no use of tools

to remove for easy cleaning.

Side windows shall have two sliding panes, front and rear, to provide

protection from the elements and allow fresh air ventilation.

Machine shall be equipped with 2 adjustable, cab mounted front LED

working lights and 2 frame mounted, rear LED working lights.

Machine shall be equipped with a standard USB charging port.

Air conditioning condenser shall not be mounted on any other cooling

core(s).

The machine shall have an 5 inch, full color, LCD display that supports

a rearview camera.

The machine shall have up to 50 individual security codes where the

operator preferences are retained for each code. The master code

provides the capability to monitor each individual code/operator for

fuel usage, hours of operation, as well as events and diagnostics.

The machine display shall provide on screen adjustment capability for

creep setting, ride control activation speed, top speed limit setting,

English/Metric units, choice of 6 languages, choice of 4 backgrounds,

and choice of 4-gauge styles.

Machine shall have a rear-view camera.

The machine shall be equipped with Speed Sensitive Ride Control, which

engages and disengages automatically, to cushion the loader arms during

carry and travel operation.

Machine shall have cellular based tracking providing machine hours and

machine location.

Machine shall have Bluetooth capability and Microphone integrated with

an AM/FM/Weather Band Radio with USB and Auxiliary Input Jack.

LOADER LINKAGES / STRUCTURES

Loader linkage shall be of a vertical lift style.

Loader linkage shall be equipped with a split style D-ring for securing

work tool auxiliary hoses.

The pins shall have countersunk grease fittings to protect them from

damage.

The machine shall be equipped with two tilt cylinders, protected by a

heavy-duty torque tube.

The machine shall have a tipping capacity of at least 10170 lb (4625

kg).

Rated operating capacity at 35% tipping load shall be no less than 3560

lb (1620 kg).

Rated operating capacity at 50% tipping load shall be no less than 5085

lb (2315 kg).

Rated operating capacity with counterweight shall be no less 5360 lb

(2435 kg).

The machine will have a dump angle of at least 54deg for superior bucket

cleanout.

The machine shall have an arched transition to the coupler for increased

dump clearance.

Vertical lift linkage shall provide visibility under the loader arm to

left & right sides when bucket is in the carry position.

The vertical lift linkage shall provide a consistent and uniform lift

path for maximum reach throughout the entire lift cycle.

Cantilevered pins in the loader linkage shall be forged and induction

hardened, and shall be the same diameter all the way through using a

flagged end to secure them to one side, allowing them to rotate in the

corresponding bore.

The machine shall have a maximum hinge pin height of at least 126.3 in

(3208 mm).

Reach at maximum lift and dump shall be at least 33.6 in (852 mm).

Clearance at maximum lift and dump shall be at least 94.5 in (2399 mm).

Rack back angle at maximum height shall be 81 degrees.

Maximum reach with arms parallel to the ground shall be 51.9 in (1319

mm).

Tilt cylinder breakout force shall be at least 7270 lb (3298 kg).

Lift cylinder breakout force shall be at least 6162 lb (2795 kg).

Electronic Dual Direction Self Level with electronic lift cycle snubbing

shall be standard.

Electronic work tool return to dig feature and electronic work tool

positioner shall be standard.

WORK TOOL OPTIONS

Machine shall have a universal quick coupler interface to easily change

work tools.

Coupler shall have the following features: a low-profile side plate

designed for optimum match to work tools and minimal material packing,

opposing wedges to ensure a tight tool fit, large contact areas to

absorb loads and minimize stress, chrome plated and lubricated vertical

pins for smooth engagement and prevention of corrosion.

Coupler shall have manual engagement and disengagement of work tools

using two high leverage handles.

The quick coupler shall be activated from inside the cab to allow

engagement and disengagement without needing the operator to exit the

machine.

The machine shall have self-relieving auxiliary quick disconnects that

connect under pressure for easier connection to work tools

SERVICEABILITY

Maintenance points shall be grouped in easily accessible, ground level

locations.

The machine shall be equipped with grouped filter configuration with

fuel/water separator filter and hydraulic oil filter being cartridge

style.

The engine shall be mounted lengthwise for better accessibility.

The radiator and hydraulic oil cooler shall be protected by a

guard/grill which shall tilt up to gain access to the cores.

The machine shall be equipped with sight gauges on the hydraulic tank

and the radiator.

The machine shall be equipped with standard system pressure and fluid

analysis test ports.

The machine shall have an electronic port allowing electronic machine

diagnostics.

The machine shall have a cab that tilts to the rear by an individual

using hand tools and shall expose all pumps, motors, valves and lines.

Cab shall be held in place when tilted by a self-latching mechanism.

The machine shall not have any required daily maintenance points that

require lifting of the cab structure.

Machine shall have a vented, steel, rear door, with a bumper that

slightly protrudes beyond the door, in order to prevent damage to engine

compartment components.

The rear door shall open to provide for easy access to both sides of the

engine without the need for hand tools.

A removable belly pan section in the floor of the machine's lower

frame shall provide excellent access for periodic cleaning

All filters shall be easily accessible from the ground, which makes

routine service quicker and virtually spill free.

MINIMUM SERVICE FILL CAPACITIES

The machine shall have a hydraulic oil tank capacity of at least 10.3

gal (39 L).

Hydraulic system shall hold 14.5 gal (55 L).

Fuel tank shall hold 32.2 gal (122 L).

Engine crankcase shall hold 3.5 gal (13 L).

Engine cooling system shall hold 4.1 gal (16 L).

Diesel Exhaust Fluid system shall hold no less than 5.0 gal (19L)

OWNING AND OPERATING COSTS

Extended life coolant shall be standard

The machine shall have recommended 500-hour engine oil change intervals.

The machine shall be equipped with hydraulic oil that can achieve

6000-hour life with regular oil sampling and recommended filter changes.

Please contact The Board of Supervisors office at (601) 735-6242 for

questions.

So ORDERED, this the 1st day of May.

Holley Lewis

Purchase Clerk

Wayne County Board of Supervisors

Publish: May 4 & May 11, 2023

ADVERTISEMENT FOR BIDS

TABLES FOR HIGH SCHOOL CAFETERIA

BID NUMBER

10450

The Wayne County Board of Education will accept sealed bids at the

office of the Superintendent of Education, 810 Chickasawhay Street,

Waynesboro, MS 39367 until 10:30 A.M., Friday, May 19, 2023 for

cafeteria tables for Wayne County High School. Complete bid

specifications may be obtained by contacting the Office of Child

Nutrition at 601-735-6019.

All bids should be signed and in a sealed envelope with the company name

and bid number on the front of the envelope. Bids will be opened at

10:30 A.M., Friday, May 19, 2023, at the Office of the Superintendent of

Education, 810 Chickasawhay Street, Waynesboro, MS 39367. The Wayne

County School District reserves the right to accept all or part of a bid

from one vendor.

The Board reserves the right to reject any and all bids.

Wayne County School District

Tommy Branch

Superintendent of Education

Publish: May 4 & May 11, 2023

Wayne County School District does not discriminate on the basis of race,

color, religion, national origin, sex, age, or disability in providing

educational programs and services or employment opportunities and

benefits. The following person has been designated to handle inquiries

and complaints regarding the non-discrimination policies of the school

district: Mrs. Lynn Revette, Assistant Superintendent of Education, 810

Chickasawhay Street, Wayne OCRMail@hhs.gov"

BEFORE THE STATE OIL AND GAS BOARD OF MISSISSIPPI

RE: PETITION OF PRIDE ENERGY CO. FOR EXTENSION OF INACTIVE WELL STATUS

UNDER STATEWIDE RULE 28 FOR WELLS LOCATED IN SOUTH THOMPSONS CREEK FIELD

IN WAYNE COUNTY, MISSISSIPPI

DOCKET NO. 199-2023-D

PUBLIC NOTICE

TO ALL OWNERS AND PERSONS INTERESTED IN SOUTH THOMPSONS CREEK FIELD IN

WAYNE COUNTY, MISSISSIPPI

TAKE NOTICE that Pride Energy Co. has filed a Petition with the

Mississippi State Oil and Gas Board requesting that the Board grant a

one year extension of the inactive well status under Statewide Rule

28(2)(a) for the following Wells located in South Thompsons Creek Field

in Wayne County, Mississippi:

Well Name & No., API No. & Location

McCardle 26-6 NO. 1

23-153-20897-0000

Sec. 26-T7N-R9W

Wayne County, MS

USA-26 NO. 1

23-153-00309-0001

Sec. 26-T7N-R9W

Wayne County, MS

TAKE NOTICE that the above and foregoing matter will be heard at the

regular June 2023 meeting to be held at SEQ CHAPTER \h \r 19:00

o'clock a.m. on June 21, 2023 in Suite E, 500 Greymont Avenue,

Jackson, Mississippi at which time and place all interested parties may

appear and contest said matter.

If you intend to contest the docket or request a continuance, you must

notify the Board and Petitioner's representative of your intention in

writing not later than 5:00 o'clock p.m. on Tuesday, June 13, 2023

[seven (7) days prior to the date stated above for said hearing].

Failure to so notify the Board and Petitioner shall be a waiver of your

right to contest or request a continuance.

You are advised that the Board may adopt orders concerning a petition

which may differ from the relief requested by Petitioner, and the Board

will enter such order or orders as in its judgment may be appropriate in

accordance with the evidence presented.

This the 4th day of May, 2023.

STATE OIL AND GAS BOARD OF MISSISSIPPI

BY: Jesse S. New

Jesse S. New

State Oil and Gas Board Supervisor

ATTORNEY FOR PETITIONER:

W. Eric West (MS Bar No. 7116)

McDavid, Noblin & West PLLC

248 East Capitol Street, Suite 840

Jackson, Mississippi 39201

Telephone No.: (601) 948-3305

Email: ewest@mnwlaw.com

Publish: May 11, 2023

BEFORE THE STATE OIL AND GAS BOARD OF MISSISSIPPI

RE: PETITION OF PRIDE ENERGY CO. FOR EXTENSION OF INACTIVE WELL STATUS

UNDER STATEWIDE RULE 28 FOR WELLS LOCATED IN THOMPSONS CREEK FIELD IN

WAYNE COUNTY, MISSISSIPPI

DOCKET NO. 198-2023-D

PUBLIC NOTICE

TO ALL OWNERS AND PERSONS INTERESTED IN THOMPSONS CREEK FIELD IN WAYNE

COUNTY, MISSISSIPPI

TAKE NOTICE that Pride Energy Co. has filed a Petition with the

Mississippi State Oil and Gas Board requesting that the Board grant a

one year extension of the inactive well status under Statewide Rule

28(2)(a) for the following Wells located in Thompsons Creek Field in

Wayne County, Mississippi:

Well Name & No., API No. & Location

C H JONES NO. 3

23-153-20310-0000

Sec. 15-T7N-R9W

Wayne County, MS

DR. C H JONES NO. 1

23-153-00626-0000

Sec. 15-T7N-R9W

Wayne County, MS

STRICKLAND 15-9 NO. 3

23-153-20806-0000

Sec. 15-T7N-R9W

Wayne County, MS

TAKE NOTICE that the above and foregoing matter will be heard at the

regular June 2023 meeting to be held at SEQ CHAPTER \h \r 19:00

o'clock a.m. on June 21, 2023 in Suite E, 500 Greymont Avenue,

Jackson, Mississippi at which time and place all interested parties may

appear and contest said matter.

If you intend to contest the docket or request a continuance, you must

notify the Board and Petitioner's representative of your intention in

writing not later than 5:00 o'clock p.m. on Tuesday, June 13, 2023

[seven (7) days prior to the date stated above for said hearing].

Failure to so notify the Board and Petitioner shall be a waiver of your

right to contest or request a continuance.

You are advised that the Board may adopt orders concerning a petition

which may differ from the relief requested by Petitioner, and the Board

will enter such order or orders as in its judgment may be appropriate in

accordance with the evidence presented.

This the 4th day of May, 2023.

STATE OIL AND GAS BOARD OF MISSISSIPPI

BY: /s/ Jesse S. New

Jesse S. New

State Oil and Gas Board Supervisor

ATTORNEY FOR PETITIONER:

W. Eric West (MS Bar No. 7116)

McDavid, Noblin & West PLLC

248 East Capitol Street, Suite 840

Jackson, Mississippi 39201

Telephone No.: (601) 948-3305

Email: ewest@mnwlaw.com

Publish: May 11, 2023

BEFORE THE STATE OIL AND GAS BOARD OF MISSISSIPPI

RE: PETITION OF PRIDE ENERGY CO. FOR EXTENSION OF INACTIVE WELL STATUS

UNDER STATEWIDE RULE 28 FOR WELLS LOCATED IN DIAMOND FIELD, WAYNE

COUNTY,MISSISSIPPI

DOCKET NO. 197-2023-D

PUBLIC NOTICE

TO ALL OWNERS AND PERSONS INTERESTED IN DIAMOND FIELD, WAYNE COUNTY,

MISSISSIPPI

TAKE NOTICE that Pride Energy Co. has filed a Petition with the

Mississippi State Oil and Gas Board requesting that the Board grant a

one year extension of the inactive well status under Statewide Rule

28(2)(a) for the following wells located in Diamond Field, Wayne County,

Mississippi:

Well Name & No., API No. & Location

HENDERSON ETAL NO. A-1

23153006160000

Sec. 1-T9N-R7W

Wayne County, MS

HENDERSON NO. B-1

23153006170000

Sec. 1-T9N-R7W

Wayne County, MS

ROBERT GRAY NO. 1

23153006940000

Sec. 7-T9N-R6W

Wayne County, MS

ROBERT GRAY NO. 2

23153006950000

Sec. 7-T9N-R6W

Wayne County, MS

MCILWAIN NO. 2

23153200290000

Sec. 6-T9N-R6W

Wayne County, MS

R. H. GRAY ETAL NO. A-2

23153200610000

Sec. 1-T9N-R7W

Wayne County, MS

ROBERT GRAY NO. 3

23153200670000

Sec. 7-T9N-R6W

Wayne County, MS

HENDERSON NO. 2

23153200950000

Sec. 1-T9N-R7W

Wayne County, MS

F. STANLEY NO. 1-A

23153021060000

Sec. 6-T9N-R6W

Wayne County, MS

ROBERT GRAY NO. A-1

23153201120000

Sec. 7-T9N-R6W

Wayne County, MS

R. H. GRAY NO. A-3

23153201750000

Sec. 6-T9N-R6W

Wayne County, MS

HENDERSON NO. A-2

23153201780000

Sec. 1-T9N-R7W

Wayne County, MS

ROBERT GRAY NO. 4

23153203280000

Sec. 7-T9N-R6W

Wayne County, MS

MCILWAIN NO. 4

23153203340000

Sec. 6-T9N-R6W

Wayne County, MS

ROBERT GRAY 7-4 NO. 1

23153208220100

Sec. 6-T9N-R6W

Wayne County, MS

HENDERSON 1-9 NO. 5

23153208370100

Sec. 1-T9N-R7W

Wayne County, MS

MESSER 1-12 NO. 1

23153208640000

Sec. 2-T9N-R7W

Wayne County, MS

TAKE NOTICE that the above and foregoing matter will be heard at the

regular June 2023 meeting to be held at SEQ CHAPTER \h \r 19:00

o'clock a.m. on June 21, 2023 in Suite E, 500 Greymont Avenue,

Jackson, Mississippi at which time and place all interested parties may

appear and contest said matter.

If you intend to contest the docket or request a continuance, you must

notify the Board and Petitioner's representative of your intention in

writing not later than 5:00 o'clock p.m. on Tuesday, June 13, 2023

[seven (7) days prior to the date stated above for said hearing].

Failure to so notify the Board and Petitioner shall be a waiver of your

right to contest or request a continuance.

You are advised that the Board may adopt orders concerning a petition

which may differ from the relief requested by Petitioner, and the Board

will enter such order or orders as in its judgment may be appropriate in

accordance with the evidence presented.

This the 4th day of May, 2023.

STATE OIL AND GAS BOARD OF MISSISSIPPI

BY: /s/ Jesse S. New

Jesse S. New

State Oil and Gas Board Supervisor

ATTORNEY FOR PETITIONER:

W. Eric West (MS Bar No. 7116)

McDavid, Noblin & West PLLC

248 East Capitol Street, Suite 840

Jackson, Mississippi 39201

Telephone No.: (601) 948-3305

Email: ewest@mnwlaw.com

Publish: May 11, 2023

SUBSTITUTED TRUSTEE'S NOTICE OF SALE

STATE OF MISSISSIPPI

COUNTY OF

Wayne

WHEREAS, on the 8th day of November, 2017, Christopher Clark and Wife,

Naomi J Clark, as tenants by the entirety with full right of

survivorship and not as tenants in common, executed and delivered a

certain Deed of Trust unto Timios, Inc., Trustee for Mortgage Electronic

Registration Systems, Inc. as nominee for Nations Lending Corporation,

Beneficiary, to secure an indebtedness therein described, which Deed of

Trust is recorded in the office of the Chancery Clerk of Wayne County,

Mississippi in Instrument# 201703950; and

WHEREAS, on the 3rd day of March, 2022, Mortgage Electronic

Registration Systems, Inc. ("MERS"), as beneficiary, as nominee for

Nations Lending Corporation, assigned said Deed of Trust unto Nations

Lending Corporation, by instrument recorded in the office of the

aforesaid Chancery Clerk in Instrument# 202200623; and

WHEREAS, on the 31st day of August, 2022 the Holder of said Deed of

Trust substituted and appointed Dean Morris, LLC as Substitute Trustee

by instrument recorded in the office of the aforesaid Chancery Clerk

in Instrument# 202202801; and

WHEREAS, default having been made in the payments of the indebtedness

secured by the said Deed of Trust, and the holder of said Deed of Trust,

having requested the undersigned so to do, on the 1st day of June, 2023,

I will during the lawful hours of between 11:00 a.m. and 4:00 p.m., at

public outcry, offer for sale and will sell, at the front steps of Wayne

County Courthouse, 609 Azalea Drive at Waynesboro, Mississippi, for cash

to the highest bidder, the following described land and property

situated in Wayne County, Mississippi, to-wit:

THE FOLLOWING DESCRIBED REAL PROPERTY LOCATED AND SITUATED IN WAYNE

COUNTY, MISSISSIPPI, TO-WIT:

COMMENCING AT THE SOUTHWEST CORNER OF THE SE1/4 OF SW1/4 OF SECTION 7,

TOWNSHIP 6 NORTH, RANGE A WEST IN WAYNE COUNTY, MISSISSIPPI; THENCE RUN

NORTH ALONG THE WEST LINE OF SAID FORTY FOR 1110.0 FEET TO THE NORTHWEST

CORNER OF THE VIVIAN PITTS STEVENS PROPERTY, BEING THE POINT OF

BEGINNING OF THE LAND TO BE DESCRIBED; THENCE RUN SOUTH ALONG SAID WEST

LINE FOR 540.0 FEET; THENCE RUN EAST FOR 525 FEET, MORE OR LESS, TO THE

CENTER LINE OF THE WILLIE MAE PITTS ROAD; THENCE RUN IN A NORTHWESTERLY

DIRECTION ALONG THE MEANDERING OF THE CENTER LINE OF SAID ROAD FOR 600

FEET, MORE OR LESS, TO THE NORTH LINE OF SAID VIVIAN PITTS STEVENS

PROPERTY; THENCE RUN WEST ALONG SAID NORTH LINE FOR 290 FEET, MORE OR

LESS, TO THE POINT OF BEGINNING, CONTAINING 5.0 ACRES, MORE OR LESS.

LAND BEING SITUATED IN THE SE1/4 OF SW1/4 OF SECTION 7, TOWNSHIP 6

NORTH, RANGE 8 WEST IN WAYNE COUNTY, MISSISSIPPI.

BEING THE SAME PROPERTY CONVEYED TO CHRISTOPHER CLARK AND WIFE, NAOMI J.

CLARK, AS TENANTS BY THE ENTIRETY WITH FULL RIGHT OF SURVIVORSHIP AND

NOT AS TENANTS IN COMMON BY DEED FROM NAOMI J. CLARK, F/K/A NAOMI J.

TILLMAN RECORDED 04/06/2015 IN INSTRUMENT 201500989, IN THE OFFICE OF

THE CHANCERY CLERK OF WAYNE COUNTY, MISSISSIPPI.

ALSO ENCUMBERING THE FOLLOWING MANUFACTURED HOME: 2011 Deer Valley Model

4078, 152 x 76, Serial No. DVAL11104290ABDV8015B

I will only convey such title as is vested in me as Substitute Trustee.

WITNESS MY SIGNATURE, this 5th day of May, 2023.

Dean Morris, LLC

Substitute Trustee

855 S Pear Orchard Rd., Ste. 404, Bldg. 400

Ridgeland, MS 39157

(318) 330-9020

adp/F22-0560

PUBLISH: 5-11-2023 / 5-18-2023 / 5-25-2023